Lb7 Thermostat Housing Leak. did you pull the thermostat housing or hard pipe? Again, when it's done right, it glides effortlessly into place. Leak is coming from the area around the top of the bypass tube / bottom of thermostat housing,. this leak will leave coolant down the front of the engine. I'd also take a look at the block. the tube goes into the thermostat housing and rotates onto the top of the water pump. here's what i find: step 6 removing the thermostat housing use your sockets to remove the bolts from the thermostat housing. I pinched the o ring putting mine back on once and it leaked. The highest place i've tracked it to is the little valley to the lower left of. mine turned out to be a small section of 3 inch by 1/2 or so coolant hose on the drivers side of the engine, that heads from the metal. if it's dripping off the back of the engine, there are some coolant hoses up on the top of the engine that you should check for leaks. i have checked all around the block, heads, coolant lines/hoses and no leaks from those areas, just at the seam of the block and.
the tube goes into the thermostat housing and rotates onto the top of the water pump. mine turned out to be a small section of 3 inch by 1/2 or so coolant hose on the drivers side of the engine, that heads from the metal. if it's dripping off the back of the engine, there are some coolant hoses up on the top of the engine that you should check for leaks. I pinched the o ring putting mine back on once and it leaked. i have checked all around the block, heads, coolant lines/hoses and no leaks from those areas, just at the seam of the block and. I'd also take a look at the block. Leak is coming from the area around the top of the bypass tube / bottom of thermostat housing,. here's what i find: did you pull the thermostat housing or hard pipe? The highest place i've tracked it to is the little valley to the lower left of.
How To Remove LB7 Duramax * Diesel Bombers
Lb7 Thermostat Housing Leak here's what i find: I pinched the o ring putting mine back on once and it leaked. step 6 removing the thermostat housing use your sockets to remove the bolts from the thermostat housing. mine turned out to be a small section of 3 inch by 1/2 or so coolant hose on the drivers side of the engine, that heads from the metal. if it's dripping off the back of the engine, there are some coolant hoses up on the top of the engine that you should check for leaks. Again, when it's done right, it glides effortlessly into place. this leak will leave coolant down the front of the engine. here's what i find: The highest place i've tracked it to is the little valley to the lower left of. the tube goes into the thermostat housing and rotates onto the top of the water pump. I'd also take a look at the block. i have checked all around the block, heads, coolant lines/hoses and no leaks from those areas, just at the seam of the block and. Leak is coming from the area around the top of the bypass tube / bottom of thermostat housing,. did you pull the thermostat housing or hard pipe?